Furnace installation in Brampton Ontario by EcoFrost
Brampton

Furnace Installation Brampton: Free In-Home Quote

New furnace installation across all Brampton neighbourhoods. TSSA-certified, Lennox-authorized, same-day available. No rebate for gas furnaces, but a heat pump add-on can earn HRS rebates (up to $2,000 in a gas-heated home), plus 0% financing for 6 months.

Free In-Home Estimate
Same-Day Installation Available
TSSA-Certified & Permitted
Heat Pump Add-On Rebate Help

Furnace Installation Options for Brampton Homes

From budget-friendly single-stage units to rebate-eligible hybrid heat pump systems. We help you choose the right furnace for your Brampton home, budget, and long-term goals.

Single-Stage Gas Furnace

95-96% AFUE
$2,800 - $4,500

Budget-friendly, reliable for most Brampton homes

Two-Stage Gas Furnace

96-97% AFUE
$4,500 - $7,000

Better comfort, lower gas bills. Our most popular choice for Brampton homes.

Variable-Speed Gas Furnace

98% AFUE
$7,000 - $10,000

Maximum efficiency & quiet operation for larger homes

Hybrid Heat Pump System

Up to 300% COP
$9,000 - $18,000

Gas furnace + heat pump combo; the heat pump can earn up to $2,000 from HRS in a gas-heated home

Prices are fully installed (labour, parts, and any permit your job needs). Before rebates. Free in-home quote available.

When Should You Replace Your Brampton Furnace?

Not sure if you need a repair or a full replacement? Here are the signs that a new furnace installation in Brampton makes more sense than another repair:

Furnace is 15+ years old
Most furnaces last 15-20 years. Beyond that, repair costs outpace a new unit.
Repair costs exceed $1,000
If a single repair is $1,000+, a new high-efficiency furnace is almost always the smarter investment.
Rising gas bills every year
Old furnaces lose efficiency. A 96% AFUE unit can cut your heating costs by about 15-20% compared to an older 80% AFUE furnace.
Uneven heat or cold spots
New variable-speed systems eliminate hot/cold zones that older single-stage units create.
Frequent breakdowns
Two or more repairs per season means your furnace is near end-of-life.
Red tag or failed inspection
A TSSA red tag means your furnace is unsafe. Replacement is required before you can use it.

Same-Day Furnace Installation in Brampton

Cold and no heat? We carry the most popular furnace models on our trucks for same-day installation across all Brampton neighbourhoods. No waiting a week for parts.

(416) 835-4775

Heat Pump Rebates + 0% Financing (6 Months)

Upgrade to a heat pump system and get up to $7,500 for a non-gas home (electric, oil, propane), or up to $2,000 for a natural-gas home, through the Home Renovation Savings Program (or $12,000 for geothermal). 0% EcoFrost financing for 6 months also available on approved credit.

See all available rebates →

Permits Handled, Licensed Gas Work

Every furnace installation in Brampton includes any City of Brampton permit your project needs, gas work by licensed technicians under TSSA rules, and manufacturer warranty registration. We handle everything so you stay warm.

Authorized Lennox Dealer

As an authorized Lennox dealer, EcoFrost can offer extended warranties and exclusive efficiency ratings not available through unlicensed installers. We also carry Goodman, Carrier, and Napoleon.

Our Furnace Installation Process in Brampton

From first call to final walkthrough, here is exactly what to expect when you book with EcoFrost.

1

Free In-Home Assessment

We visit your Brampton home, measure heat loss, inspect your ductwork, and run a Manual J load calculation. This step lets us size the new furnace correctly for your home, not just slot in the cheapest unit that will fit.

2

Written Quote

After the assessment, we compare Lennox, Goodman, Carrier, and RunTru options at different efficiency levels and give you a flat-rate written quote. No surprise fees. The price you see is what you pay.

3

Permit Check

A like-for-like furnace swap on your existing ductwork does not need a City of Brampton building permit. A conversion from electric, oil, or boiler heat to a gas forced-air furnace does. We confirm which applies and handle the permit when one is needed.

4

Installation Day

Our team arrives, removes and disposes of the old furnace, installs the new system, connects the gas line and venting, and finishes all electrical work. Most Brampton installations are complete in 4 to 6 hours.

5

Commissioning and Handoff

We start the system, test every component, calibrate your thermostat, register the manufacturer warranty, and walk you through how everything works. You leave confident in your new equipment.

Furnace Installation Across All Brampton Neighbourhoods

We install furnaces in every part of Brampton, from Bramalea, Heart Lake, and Peel Village to Springdale, Sandalwood, Castlemore, Mount Pleasant, Credit Valley, Fletchers Creek, Churchville, and Bram East. Brampton borders Mississauga, where EcoFrost is based, so the whole city sits inside our regular service area.

What Brampton's Housing Means for Your New Furnace

Brampton's homes are young by GTA standards. In the 2021 Census, 63% of Brampton's 182,475 occupied homes were built in 1991 or later, and 48% were built in 2001 or later. Only about 23% date from before 1981. Just over half (53%) are single-detached houses, with semi-detached houses (14%) and row houses (13%) making up most of the rest. That mix shapes the furnace decision in three ways.

Many original furnaces are reaching the replacement window now

A house built between 2001 and 2010 that still has its first furnace is running equipment that is now 16 to 25 years old. Most furnaces last 15 to 20 years, so a large share of Brampton homes are making their first furnace replacement decision right now. If yours came with the house, check the date on the furnace rating plate before you spend money on a major repair. Our guide on how long a furnace lasts in Ontario covers the warning signs.

Size the new furnace to the house, not to the old label

Copying the capacity printed on the old furnace repeats any sizing mistake made when the house was built. Semi-detached and row houses share walls with neighbours and often need less heat than a detached house of the same floor area, while a finished basement adds load. That is why we run a Manual J load calculation at the free assessment instead of matching the old unit.

Two-unit houses need the furnace safety interlock kept intact

Brampton has required second units to be registered since 2015, and many houses now have a legal basement apartment. The City's second-unit permit drawings have to show the HVAC equipment and the duct-type smoke detectors in the air-handling system. When one furnace serves both units, a replacement furnace has to be wired so that detector can still shut it down. Tell us about a second unit when you book, so the quote covers it.

Does a Brampton Furnace Installation Need a Permit?

It depends on what is being replaced. The City of Brampton says no building permit is needed to replace an existing forced-air furnace when the ductwork is not altered. That covers most like-for-like replacements.

A permit is needed when the heating system itself changes, for example replacing electric heat, an oil furnace, or a boiler with a natural-gas forced-air furnace. For that kind of conversion, the City asks for heat loss and gain calculations, a ventilation design summary, and scaled drawings that show the equipment and every supply and return duct.

Permit or not, the gas work itself must be done by a TSSA-registered contractor using licensed gas technicians. We confirm which rules apply to your house during the free in-home assessment.

What Brampton Homeowners Say

“EcoFrost replaced our 18-year-old furnace in our Springdale home last fall. The technician did a full assessment, explained our options without any pressure, and had the new Lennox unit installed in about 5 hours. The difference in comfort and our gas bills is noticeable. Professional from start to finish.”

Harjit P.
Springdale, Brampton

“Called EcoFrost for a furnace installation in our Mount Pleasant home after getting quotes from two other companies. EcoFrost was the only one who came out for an in-person assessment first. The permit was included, the crew was on time, and the price matched the quote exactly. Highly recommend.”

Aisha M.
Mount Pleasant, Brampton

Furnace Installation Brampton: Frequently Asked Questions

How much does furnace installation cost in Brampton?

Furnace installation in Brampton typically ranges from $2,800 to $10,000 fully installed, depending on the model and efficiency level. We provide a firm flat-rate quote after a free in-home assessment. No hidden fees.

How long does furnace installation take in Brampton?

We complete most furnace replacements in Brampton in 4 to 6 hours. Our team handles removal of the old unit, installation of the new furnace, gas connection, venting, and a full safety test. All done in one visit.

Are there rebates for new furnace installation in Brampton?

In 2026, standalone gas furnace upgrades no longer receive direct HRS rebates (HRS funds heat pumps instead). If you upgrade to a hybrid heat pump system (heat pump + gas furnace backup) you may qualify for the HRS air-source heat pump rebate of up to $2,000, because the home stays heated by natural gas, plus a $125 smart thermostat rebate. We handle all rebate paperwork.

Do you handle permits for furnace installation in Brampton?

Yes. The City of Brampton does not require a building permit to replace an existing forced-air furnace when the ductwork is not altered. A permit is required when you convert from electric heat, an oil furnace, or a boiler to a natural-gas forced-air furnace, and that application needs heat loss and gain calculations and duct drawings. We confirm which applies to your house and handle the permit when one is needed. All gas work is done under TSSA rules by our licensed gas technicians.

My Brampton house has a legal basement apartment. Does that change the furnace installation?

It can. When one furnace serves both units, the City's second-unit permit drawings show duct-type smoke detectors in the air-handling system, and the new furnace has to be wired so that detector can still shut it down. Tell us about the second unit when you book so we can check the existing setup and include it in the quote.

My furnace came with my Brampton house. Is it time to replace it?

Check the manufacture date on the furnace rating plate. Most furnaces last 15 to 20 years, and in the 2021 Census 48% of Brampton homes were built in 2001 or later, so many original furnaces are now in that range. Age alone is not a reason to replace a furnace that runs safely, but an older unit facing a major repair usually is. We give you both options at the free assessment.

What brand of furnace do you install in Brampton?

We are an authorized Lennox dealer and also install Goodman, Carrier, and Napoleon furnaces. During your free in-home estimate, we recommend the right brand and efficiency level for your home size and heating needs.

What is the most efficient furnace for a Brampton home?

A variable-speed modulating furnace rated at 98% AFUE is the top efficiency option for a gas furnace. For even greater savings, a hybrid system combining a gas furnace with a heat pump can reach 300% COP during mild weather, making it ideal for Brampton's shoulder seasons.

Does EcoFrost offer financing on furnace installation in Brampton?

Yes. We offer 0% financing for the first 6 months on approved credit through our Financeit partnership. After the 6-month promotional period, Financeit's standard interest rate applies. Terms can extend up to 60 months total. You receive full approval and details before installation day, so there are no surprises.

What happens to my old furnace when you install a new one?

We disconnect, remove, and dispose of your old furnace as part of every installation. The unit goes to a licensed recycling facility. Removal and disposal are included in your flat-rate quote, so there is nothing extra to arrange or pay.

How do I know what size furnace I need for my Brampton home?

We perform a Manual J load calculation during your free in-home assessment. This accounts for your home's square footage, insulation levels, ceiling height, window area, and local climate data. Getting the size right prevents wasted energy and premature equipment wear.

Ready for a New Furnace in Brampton?

Free in-home estimate. No pressure, no obligation. TSSA-certified, fully permitted, same-day available.

Call NowBook Online